Skip to content
Free shipping on orders $20+ 30-day returns Track an order
0

Inxens

Inxens Ring Sizers for Loose Rings, 4 Clear Silicone Coils

$6.99 $7.99 Save $1.00 (13%)
Arrives in 2–5 business days Free shipping on orders $20+ · ships from US fulfillment centers

In stock

  • Free shipping on orders $20+
  • 30-day returns · policy
  • Secure checkout · Apple Pay, Google Pay, PayPal, cards

A 4-pack of clear silicone ring sizers for loose rings: 2 mm round, 3 mm flat, 5 mm round and 5 mm flat coils, each 100 mm long, that wrap under the band and trim to fit bands 1–8 mm wide.

  • 4 clear silicone coils: 2 mm round, 3 mm flat, 5 mm round, 5 mm flat
  • Each coil is 100 mm (about 3.9 in) long; trim with household scissors
  • Covers band widths from 1 to 8 mm
  • No adhesive and no metal parts; unwind or reposition any time
  • Sits under the band, where clear silicone stays low-key
  • For slightly loose rings, not a replacement for resizing

What these ring sizers for loose rings do

These ring sizers for loose rings are clear silicone spiral coils that you wind onto the lower part of a band, the side that rests toward your palm. The coil takes up the extra space between ring and finger, so a ring that's slightly too big spins and slides less. You get four coils, each 100 mm (about 3.9 in) long, in three widths and two profiles.

Which coil fits your band?

Match the coil to the width of your band. Measure across the bottom of the band with a ruler marked in millimeters, then pick from the table. If your band falls between two widths, start with the narrower coil so it doesn't show past the edges.

CoilProfileSuits
2 mm (0.08 in)RoundThin, delicate bands such as slim engagement rings
3 mm (0.12 in)FlatThinner bands such as many wedding bands
5 mm (0.2 in)RoundWider rings, statement rings and men's bands
5 mm (0.2 in)FlatWider rings, statement rings and men's bands

Together the four coils cover bands from 1 to 8 mm wide. The round and flat 5 mm coils give a wide ring two different feels; try both and keep the one you find more comfortable.

How to fit a ring tightener coil

  1. Pick the coil that matches your band width.
  2. Wind it onto the lower part of the band, keeping the turns close together.
  3. Slide the ring on and check the fit. Add or remove a turn until the ring feels snug but still slips over your knuckle.
  4. Trim the extra length with household scissors.

There's no adhesive, so you can unwind the coil, move it, or swap to another width when the fit changes. Fingers tend to shrink a little in cold weather, so a ring that fits in summer can start turning in winter. A removable ring guard handles that without a trip to the jeweler.

Is a ring guard right for your ring?

A silicone ring guard is made for rings that are slightly loose: they spin, slide toward the knuckle, or shift while you type and carry bags. It suits heirloom rings, gifts and pieces you'd rather not have resized permanently, since the coil comes off and leaves the band as it was.

It isn't the right fix for a ring that's several sizes too big. Filling that much space would take more silicone than feels comfortable, so a jeweler's resizing is the better route there.

How visible is it?

The silicone is clear and sits under the band, so on most rings it's hard to spot from the top. It's low-profile, not invisible: up close, and on very thin bands, you can see it. The 2 mm round coil is the smallest option for delicate rings.

If you're sorting out other small comfort fixes, our clear gel toe caps are another soft silicone helper, and gold cuffs and charms for braids add jewelry to your hair. More small items are in home and everyday finds.

Care and storage

When you clean the ring, unwind the coil, wipe it with a damp cloth and let both dry before you put the ring back on. Keep spare coils and offcuts in a small bag or jewelry box so they stay clean and easy to find.

Specifications

Pieces4 coils
Coil widths2 mm round, 3 mm flat, 5 mm round, 5 mm flat
Coil length100 mm (about 3.9 in) each
Band widths covered1–8 mm
MaterialSilicone
ColorClear
AttachmentWraps on; no adhesive, no metal parts
TrimmingHousehold scissors
BrandInxens
SKUE5-SWWM-5SRQ

Frequently asked questions

How loose can a ring be for a ring sizer to work?

These coils are meant for rings that are slightly loose, the kind that spin, slide or shift during the day. If a ring is several sizes too big, a coil won't close the gap comfortably, and a jeweler's resizing is the better choice.

Which ring size adjuster should I use for a thin band?

Use the 2 mm round or 3 mm flat coil for thin bands, and one of the 5 mm coils for wider rings. Between them, the four coils cover band widths from 1 to 8 mm.

Do I need glue or tools to fit a ring guard?

No glue. Wind the coil onto the lower part of the band until the fit feels snug, then trim the extra length with household scissors.

Can I reuse or move the coil?

Yes. It isn't glued, so you can unwind it, reposition it, or switch widths when your fit changes between warm and cold months. Once you trim a coil it stays shorter, so cut a little at a time.

Can men use these ring sizers?

Yes. They're made for adults and aren't gender-specific. For a wider men's band, use one of the 5 mm coils; the set covers bands up to 8 mm wide.

Are clear ring sizers invisible?

They're low-profile rather than invisible. The clear coil sits under the band, so it's hard to see from the top on most rings, but it shows up close, especially on very thin bands.

Is there anything metal in the ring guard?

No. Each coil is silicone only, with no metal parts and no adhesive, so nothing is clamped or stuck to your ring.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.