
Regpre
Regpre Large Red Christmas Tree Topper Bow, 12 x 14 in
$15.99
Shop
Occasions
More
Azude
In stock
Two separate 25 ft (7.6 m) strands of flat red and green PET holly-leaf and berry shapes on a bendable wire core, 50 ft (15.2 m) in all, with no lights, for trees, mantels, stair rails and doorways.
The pack holds two separate 25 ft (7.6 m) strands, 50 ft (15.2 m) in total, and each strand weighs just 25 g (about 0.9 oz). Flat holly-leaf and berry shapes in red and green sit at intervals along a flexible wire core.
The shapes are shiny PET plastic with a foil-like glint, not lifelike foliage. There are no bulbs: "wired" means the bendable core, not an electrical cord. Leaf size and strand width aren't listed, so compare the photos if you're matching a garland you own.
One 25 ft strand runs along a 9 ft shelf edge twice with about 7 ft to spare, and both strands give five layered passes. Use the estimates below to split the strands between two spots or stack them in one.
| Route (our assumptions) | Garland per pass (estimate) | One strand, 25 ft | Both strands, 50 ft |
|---|---|---|---|
| Straight 9 ft run, such as a shelf edge or window ledge | 9 ft | 2 passes, about 7 ft left | 5 passes, about 5 ft left |
| 6 ft mantel: three swags dipping 8 in, 12 in tails | About 9.5 ft | 2 passes, about 6 ft left | 5 passes, about 2.5 ft left |
| Handrail 2.5 in thick, one turn every 12 in | About 1.2 ft per foot of rail | A rail up to about 20 ft long | A rail up to about 40 ft long |
| 72 x 80 in double doorway, sides and top | About 19.3 ft | 1 doorway, about 5.7 ft left | 2 doorways, or one doorway layered twice |
| 7.5 ft tree, 5 ft wide at the base, 6 wraps | About 48.3 ft | The top 5.3 ft of the tree | All 6 wraps, under 2 ft left |
The tree row treats the tree as a cone: the wide lower wraps take most of the length, so the first strand runs out about 5.3 ft down and the second finishes the bottom. Check your own route with a piece of string, and allow a few inches wherever strands overlap.
A single pass of this garland leaves visible gaps between the holly shapes, so branches and ornaments stay in view. For a denser line over a short run, lay a second or third pass beside the first and twist them loosely together. Where strands meet, overlap the ends by a few inches and bend both around the same branch or spindle so the join disappears.
Bending the wire once around a branch tip every few feet holds the strand on a tree without clips; shape each wrap by hand instead of pulling it tight. Our guide on how to put garland on a Christmas tree covers wrapping tinsel from top to bottom.
On stairs, wind it around the handrail or weave it through the spindles. No hooks or ties are listed in the pack; for door frames and walls, see hanging garland without damaging walls. The wire shapes the garland but isn't meant to carry weight, so hang ornaments from branches, not from the strand.
The red-and-green palette suits a retro-style tree or traditional glass baubles. Finish the top with a large red tree topper bow, and hang red and white plastic candy canes on the branches between the garland wraps.
Loosen one wrap at a time instead of pulling the strand free, so the leaves don't snag. Coil each strand loosely and store both in a box where nothing heavy presses on the holly shapes.
| Pieces | 2 separate strands |
|---|---|
| Strand length | 25 ft (7.6 m) each |
| Total length | 50 ft (15.2 m) |
| Weight | 25 g (about 0.9 oz) per strand |
| Shapes | Flat holly leaves and berries, PET plastic |
| Colors | Red and green, shiny foil-like finish |
| Core | Flexible wire, bends to shape |
| Lights | None |
| Leaf size and strand width | Not listed |
| Hanging hardware | None listed |
| Brand | Azude |
| SKU | 5G-9OZ7-O2OE |
No. "Wired" refers to the flexible wire core that lets you bend the strand, not to an electrical cord, and there are no bulbs or batteries. The shiny PET shapes pick up light from tree lights or a window nearby.
Each strand is 25 ft (7.6 m), and the two are separate, for 50 ft (15.2 m) in total. Use one per spot, or run them end to end with a few inches of overlap where they meet.
Yes, with length to spare. One 25 ft strand covers a 9 ft run twice for a fuller line and leaves about 7 ft, and the second strand can go somewhere else. The product facts don't mention cutting, so plan to layer or loop the extra length rather than trim it.
By our estimate, one strand gives about 7 wraps on a 3 ft tree that is 2 ft wide at the base. On a 7.5 ft tree 5 ft wide, both strands make about 6 wraps along the branch tips, or 5 wraps with roughly 9 ft left. Fuller or wider trees use more.
Fake. The leaves and berries are flat shapes cut from shiny PET plastic, so there is no plant material to wilt or drop. Expect a foil-like shine rather than the look of natural foliage.
Not from the strand itself. The wire core is there to shape the garland, not to carry extra weight, so hang ornaments from the branches and let the garland run between them.
The product facts don't cover outdoor use or weather resistance, so we can't say how it holds up to rain, wind or sun. It is described for indoor trees, mantels, door frames, stair railings and shelves.
Yes. Loosen each wrap as you take it down rather than pulling, then coil each strand loosely and store it where the holly shapes won't be crushed.
Only logged in customers who have purchased this product may leave a review.
Loading…
Reviews
There are no reviews yet.